Figure 56: WP810 Upgrade Configuration via Web GUI
Note: Please do not power off or unplug the WP810 when the upgrading process is on.
Upload Firmware Locally
If there is no HTTP/TFTP server, users could also upload the firmware to the WP810 directly via Web GUI.
Please follow the steps below to upload firmware to WP810 locally.
1. Download the latest WP810 firmware file from the following link and save it in your PC.
http://www.grandstream.com/support/firmware
2. Log in the Web GUI as administrator in the PC.
3. Go to Web GUI→Maintenance→Upgrade and Provisioning → Firmware.
4. Click the "Start" button under “Upgrade Firmware”, a window will be prompted to select firmware file to
upload.
5. Select the firmware file from your PC. Then uploading progress will show on the window.
6. When uploading is done, users can see the upgrading process starts on the WP810 LCD.
7. The phone will reboot again with the new firmware version upgraded.
To Next Page
Loading...
Need help?
General
