1 – 2
1.1 Overview
The CE2000-60/120 is a cutting plotter that was developed for the specific purpose of cutting color
adhesive-backed film.
It is equipped with various functions that aim at improving the cutting quality. To ensure good cutting
quality and optimum productivity, be sure to read this User’s Manual thoroughly before use.
1.2 Standard Accessories
After unpacking the cutting plotter, check that the standard accessories listed below are all present.
If an accessory is missing, please promptly contact your sales representative or nearest Graphtec vendor.
CE2000-60/120
OPERATION MANUAL
MANUAL NO. CE2060-UM-451
CUTTING PLOTTER
Power cord: 1 Operation Manual: 1 User Guide CD-ROM: 1
Cutter pen plunger: 1 Cutter blade: 1 (CB09UA) Roll media tray: 1
(CE2000-60 only)
Media cutter: 1 Water-based fiber-tip pen: 1
Stand : 1 (CE2000-120 only, packed in a separate box).
Stopper : 2 (CE2000-120 only, packed together with main unit).
Stock roller : 2 (CE2000-120 only, packed together with main unit).
To Next Page
Loading...
