GRAPHTEC CE2000-60 - Assembling Your Plotter (CE2000-120)

1 – 3
1.3 Assembling Your Plotter (CE2000-120)
Before You Begin Assembly (When Using the Basket)
If you will be mounting the optional basket, assemble the basket after you have completed Step (1)
in the section entitled “Assembling the Stand.”
(1) Mount the center bar (
3
) onto the R side foot (
1
) and L side foot (
2
).
NOTE: At such time, loosely fasten the hexagon bolts.
(2) Place the CE2000-120 main unit onto the stand, then secure it in place using hexagon bolts.
NOTE: While adjusting the positions of the temporarily fastened R and L side feet, mount
the main unit onto the stand by fitting the stand’s pins into the corresponding holes
in the main unit.
Secure the center bar by tightening its hexagon bolts.
1
2
3
4
5
CE2000-120