5 – 6
5.6 Selecting the LENGTH UNIT
Use this function to select either mm or inch as the LENGTH UNIT.
Step 1
Press the
PAUSE
key to enter PAUSE mode.
Step 2
Press the
NEXT PAGE
key until the menu below appears.
INTERFACE
PEN UP/DOWN
Step 3
Simultaneously press the
and
NEXT PAGE
keys to display the menu below.
PEN UP SPEED
OFFSET FORCE
Step 4
Press the
NEXT PAGE
key until the menu below appears.
TEST
LENGTH UNIT
Step 5
At this menu, press the
F2/TEST
key (LENGTH UNIT) to display the menu below.
mm LENGTH
inch UNIT
The blinking square cursor indicates the currently selected LENGTH UNIT.
To select mm, press the
F1/ORIGIN
key.
To select inch, press the
F2/TEST
key.
When the blinking cursor is positioned in front of the desired setting, press the
ENTER
key.
To Next Page
Loading...
