GRAPHTEC CE2000-60 - Front View

2 – 2
2.1 Front View
CE2000-60
Cutting mat : Cutting or plotting is performed on this mat.
Grit rollers : Feeds the medium forward or backward.
Push rollers : Pushes the medium against the grit rollers.
Pen holder : Holds the cutter pen and moves it up and down.
Medium set lever : Raises or lowers the push rollers when loading a medium.
Control panel : Used to operate the cutting plotter and set its functions.
Parallel connector : Used to connect a Centronics-compatible parallel interface cable.
Serial connector : Used to connect an RS-232C serial interface cable.
Pen carriage : Moves pen left & right.
CE2000-120
Grit rollers : Feeds the medium forward or backward.
Push rollers : Pushes the medium against the grit rollers.
Pen holder : Holds the cutter pen and moves it up and down.
Medium set lever : Raises or lowers the push rollers when loading a medium.
Control panel : Used to operate the cutting plotter and set its functions.
Parallel connector : Used to connect a Centronics-compatible parallel interface cable.
Serial connector : Used to connect an RS-232C serial interface cable.
Pen carriage : Moves pen left & right.
Stand : The main unit is placed on this stand (a stand is optional for the CE2000-60 model).
Pen holder
Control panel
Grit rollers
Push rollers Pen carriage
Medium set lever
Serial connector
Parallel connector
Stand
Push rollers
Pen holder
Pen carriage
Media set lever
Control panel
Serial connector
Parallel connector
Cutting mat
Grit rollers