GRAPHTEC CE2000-60 - Rear View

2 – 3
2.2 Rear View
CE2000-60
Roll media tray : Holds a roll medium for feeding to the cutting plotter.
Roll media tray guide rail : Used to mount the roll media tray.
AC power inlet : Connects one end of the power cord to the cutting plotter.
Power switch : Controls the on/off status of the power supply to the cutting plotter.
CE2000-120
AC power inlet : Connects one end of the power cord to the cutting plotter.
Power switch : Controls the on/off status of the power supply to the cutting plotter.
Stopper : Used to adjust the position of roll film by preventing the film from sliding from side to side.
Stock roller : Holds the roll film for feeding to the cutting plotter.
Stopper
Stock roller
AC power inlet
Power switch
AC power inletRoll media tray guide railRoll media tray
Power switch