iii
Safety Precautions (Continued)
WARNING
If the cutting plotter generates smoke, is too hot, emits a
strange odor, or otherwise functions abnormally, do not continue
using it. Turn off its power and unplug its power cord from
the electrical socket.
• Use of the cutting plotter in such status may result in a fire hazard
or electrical shock.
• After confirming that smoke is no longer being generated, contact
your sales representative or nearest Graphtec vendor to request
repair.
• Never try to perform repair yourself. Repair work by inexperi-
enced personnel is extremely dangerous.
Do not allow dust or metallic matter to adhere to the power
plug.
• A dirty power plug may result in electrical shock or a fire hazard
due to current leakage.
Do not use the power cord if it is damaged.
• Use of a damaged cord may result in electrical shock or a fire
hazard due to current leakage.
• Replace the power cord with a new one.
Be careful when handling the cutter blade.
• Touching the blade with your bare hand may cause injury.
• During a cutting operation, keep away from the cutter blade.
Avoid contact
Prohibited
Beware of electrical shock
Unplug the power
cord from the socket
Prohibited
To Next Page
Loading...
