GRAPHTEC CE3000-40 - Setting Special Functions a; Description of Special Functions B; Display Language Setting (MENU LANGUAGE SELECTION)

To Next Page

To Previous Page

5 – 4

5.2 Setting Special Functions A

Turn on the cutting plotter while holding down the key. The menus for setting the special functions are

displayed.

Scroll up or down to select the required menu using the (NEXT) or (PREV.) keys.

Select the setting details using the and keys, and press the (ENTER) key to register the set-

ting. To cancel, press the (NEXT) or (PREV.) key. The next menu is displayed.

Once all the settings have been made, turn off the cutting plotter.

5.3 Description of Special Functions B

These functions are speciﬁed only in the special situations described below, and are not normally used.

■ Display Language Setting (MENU LANGUAGE SELECTION)

This function sets the language used on the display. One of six languages can be selected: English,

French, German, Italian, Spanish, or Japanese.

Step

":", ";" ENABLED

"W" PEN DOWN

PRIORITY MANUAL

INIT.B 2mm

UP MODE OFF

MEDIA ON

HOME ON

PARALLEL I/F 1

B.W.S. OFF

In GP-GL command mode

MODEL 7550