GRAPHTEC CE3000-40 - 1.3 Assembling the Stand

1 – 7
1.3 Assembling the Stand (CE3000-120: Standard / CE3000-60: Optional)
■ Stand Construction
The stand is made up of the following parts.
■ Stand Assembly Instructions
Fasten the stand feet (L/R) to the stand side bars (L/R) with the hexagonal socket bolts (M5), using the
Allen wrench.
Step
1
Stand feet (L/R)
CE3000-60
Hexagonal socket bolt
(M5) x 12 Coin screw x 4
CE3000-60 only
Hexagonal socket bolt
(M6) x 8
CE3000-120 only
Allen wrench (M5) Allen wrench (M6)
CE3000-120 only
CE3000-120
Center bar
CE3000-60
CE3000-120
Stand side bars (L/R)
CE3000-60
CE3000-120
Hexagonal
socket bolt (M5)
Stand side bar
Stand foot
Stopper
Front
Hexagonal
socket bolt (M5)
Stand side bar
Stand foot
Front
CE3000-60 CE3000-120
* There are three
bolt holes, but
the center one
is not used.