GRAPHTEC CE3000-40 - 2.4 Adjusting and Mounting the Cutter Pen

2 – 11
Position all of the rollers over the right-hand wide grit roller. Position the medium with the left-hand edge
aligned with the left-hand edge of the grit roller, and position the push rollers over both edges. The mini-
mum width of the medium that can be set is 50 mm for the CE3000-40/60 and 85 mm for the CE3000-120.
2.4 Adjusting and Mounting the Cutter Pen
Individual cutter blades have a variety of features. Select the optimal cutter blade to suit the medium to be
cut.
■ Types and Features of Cutter Blades
• Push roller (1) must be positioned over the right-hand wide grit roller.
• The medium must always be positioned over the media sensor.
For Minimum-Size Media
• The medium must be at least 125 mm in length.
• The medium must always be positioned over the media sensor.
To avoid cutting your fingers, always handle the cutter blade with caution.
Part No. and
profile
Blade diameter
and offset
Compatible
plunger
Use and features
CB 09UA ø0.9 mm
0.45
PHP32-CB09N The standard blade for cutting color adhesive-backed
media. Suitable for cutting media up to 0.25 mm in
thickness.
Max. cutting distance: Approx. 4,000 m
CB 15U ø1.5 mm
0.75
PHP32-CB15N Capable of cutting thicker media than possible with the
CB09UA blade. Suitable for cutting media 0.25 mm to
0.5 mm in thickness.
CB 15UB ø1.5 mm
0.15
PHP32-CB15N Suitable for detailed cutting (e.g., letters less than 10
mm in size) of media up to 0.25 mm in thickness.
CAUTION
Medium
Push roller (2)
Grit roller
Media sensor
Push roller (1)
CE3000-40/60
Medium
Push roller (1)
Push roller (3)
Grit roller
Media sensor
Push roller (2)
CE3000-120
OK OK
CAUTION
CAUTION