4 – 37
Press the (ENTER) key to display the wear-rate setting submenu, and then press the (NEXT) or
(PREV.) key until the following menu is displayed.
Press the (ENTER) key to display the wear-rate clear menu.
The number to right of “CLEAR GROUP” is the group number. Use the and keys to increase or
decrease the group number, and press the or key to select “YES” or “NO.” Select “YES” for the
group number to be cleared, and press the (ENTER) key to clear the total distance. To cancel, press
the (NEXT) or (PREV.) key.
Press the (PAUSE) key to cancel PAUSE mode.
Step
3
Step
4
Step
5
Step
6
CLEAR GROUP
CLEAR GROUP1<YES>
To Next Page
Loading...
