Touch Touch
Touch
Touch
Touch
Touch
17
- RF ON/OFF
It is used to turn on or off transmitter’s “RF” function. If you are not ying a model but program-
ming transmitter only, you are able to save the battery of the transmitter by setting RF to turn
off. Under “OFF” status, transmitter is disconnected with the receiver. Touch “ON” icon in “RF
ON/OFF” to change to “OFF”
- RF TYPE
mz-24 offers 2 RF types, NORMAL and FRANCE, to comply with country regulation.
“NORMAL” type is usually used in most countries, but you need France RF setting to comply with
France regulations in FANCE. France RF setting should only be turned on when operating your
transmitter in France outdoors. “NORMAL” type can be changed into “FRANCE” type by touching
“NORMAL” icon. If the “FRANCE” icon is touched again, it can be changed into “NORMAL” icon.
Touch Touch
To Next Page
Loading...
Need help?
General
