48
Touch
Touch Touch
Touch
Touch
Touch
Touch
Touch
Touch
Touch
12. Trainer (Helicopter, Airplane, Gilder)
mz-24 features a programmable trainer function. Two transmitters must be connected by
Wireless or an optional DSC code. This function makes it possible for the instructor to choose
which functions and channels are to be used for instruction.
In FUNCTION page, touch “Trainer” icon to call the trainer setup page. The default value,
TEACH, is set in all channels which means that this transmitter is Teacher transmitter. If touch-
ing TEACH icon, it is switched to PUPIL.
Assigned the desired channel to Pupil transmitter by touching “TEACH” icon to switch to PU-
PIL and touch “NULL” icon in CTL line to call “Select” message popup. Move the switch with
your choice then that switch is designated as on/ off switch, but we recommend to use S8 as
the trainer switch. When the switch direction setup page appears, you may select ON or OFF
by touching icons. When the switch is moved to the direction of ON, the function is operated.
To Next Page
Loading...
Need help?
General
