83
Touch
Touch
Touch Touch
Touch
Touch
Touch
Touch
Touch
7. Snap roll
It is used to select the switch and adjust the value of AILE, ELEV, RUDD channels for the snap roll
function. Four snap roll directions can be set for your convenience.
In function page, touch “Snap roll” icon to call the snap roll setup page. Touch “INH” icon in ACT
line to switch to ON. Touch and activate the value in AILE, ELEV and RUDD line to adjust the
values with “INC” and “DEC” buttons. Touch “NULL” icon in CTL line to call “Select” message
popup then move the switch with your choice then that switch is designated as on/ off switch and
then the switch direction setup page appears. You may select ON or OFF by touching icons. When
the switch is moved to the direction of ON, the function is operated. Touch “BACK” icon to return to
Snap roll setup page and to FUNCTION page
Touch
Touch
Telemetry
To Next Page
Loading...
Need help?
General
