92
Touch
Touch
Touch
Touch
Touch
Touch
Telemetry
Touch
Touch
Touch
Touch
Telemetry
11. Airbrake (Airplane)
This mixing is used when the airplane is need to land or descent vertically. Airbrake can be set
by AILE, FLAP and ELEV.
Touch “Airbrake” icon in the function setup page to call the airbrake setup page. The rst page
is AILE setup and you may access to FLAP, ELEV and AIRBRAKE DELAY setup page by
touching “NEXT” icon in the top right. Touch “INH” icon in ACT line to switch to “ON” and touch
“ON” in CTL line to call the “Select” message popup. Move the switch or stick or volume with
your choice then that switch or stick or volume is designated as on/ off key and then the key
direction setup page appears. You may select ON or OFF by touching icons.
When the key is moved to the direction of ON, the function is operated. Touch “BACK” icon
to the previous page. Now, you may set the operation value. Touch and activate the values in
blue and adjust them with “INC” and “DEC” buttons. FLAP, ELEV and AIRBRAKE DELAY can
be programmed in the same way after accessing the next page. If you touch SERVO icon on
the top right to call SERVO page, you may check the setup value for Airbrake.
To Next Page
Loading...
Need help?
General
