To Next Page

To Previous Page

Touch

9-4. FLAP >> ELEV

This mixer is used to set elevator (pitch-trim) compensation when a ap command is given. This

typically enables you to adjust the model’s airspeed automatically when aps are lowered.

In FLAP MIX page, touch “INH” icon in ACT line to switch to “ON” then FLAP >> ELEV function is

activated. Touch “ON” in CTL line to call the “Select” message popup and move the switch or stick

or volume with your choice then that switch or stick or volume is designated as on/ off key and then

the key direction setup page appears. You may select ON or OFF by touching icons. When the

key is moved to the direction of ON, the function is operated. Touch “BACK” icon to return to FLAP

MIX page. Touch “>>” icon in “SET” and “FLAP >> ELEV” cross line to call “FLAP >> ELEV” setup

page. Touch and activate the values in blue and adjust them with INC and DEC buttons. When the

setup is completed, touch SERVO icon on the top right to call SERVO page. You may check the

setup value for “FLAP >> ELEV”.

GRAUPNER mz-24 HOTT Operating Instructions

Other manuals for GRAUPNER mz-24 HOTT