To Next Page

To Previous Page

Touch

- ESC MOD

You may decide the voice functions of ESC MOD to use or not to use. 4 voice functions, RPM,

CURRENT, POWER-V, and CAPACITY, are available.

Touch “>>” icon to call the ESC MOD setup page. All the functions are marked with red dot by

default in the page. Touch the function icon that you don’t want to use then the red dot is switched

to white dot. The functions marked with white dot are deactivated. Touch “BACK” icon to return to

VOICE TRIGGER setup page.

14-6. DISPLAY SETUP FOR TELEMETRY SENSOR

All telemetry indication of the sensors are displayed at the receiver telemetry page.

Connect option sensors to receiver and access to the sensor select setup page by course of

page transfer.

Touch “OFF” icon of the connected sensors to switch to “ON” at the sensor select setup page.

After that, return to the receiver telemetry page. You may check all telemetry indication here

and access to the next page by touching “NEXT” icon on the top left

Telemetry

Touch

GRAUPNER mz-24 HOTT Operating Instructions

Other manuals for GRAUPNER mz-24 HOTT