To Next Page

To Previous Page

Touch

Telemetry

1. Q.LINK

This function is used to set Q.LINK and assign the corresponding switch to cope with the unex-

pected trouble situation. Since the adjusted value is activated by moving the switch and you can

cope with the crisis with just one switch. It makes you operating the ight much easier. Q.LINK for

airplane type consists of 8 types. (NORMAL, IDEL UP1, IDLE UP2, IDEL UP3, HOLD, Q.LINK6,

Q.LINK7, Q.LINK8) Normal type is set as a default value.

In the transmitter main page, touch “Function” icon to call the Function page and touch “Q.LINK”

icon to call Q.LINK setup page. Q.LINK list is displayed. “1.NORMAL” is the default value and it

cannot be changed.

1-1 NEW

This function is used to create new Q.LINK. Touch the value in “Q.LINK” line to activate it in blue

and touch “NEW” icon in the right to call “CTRL” and “DELAY” options. In “CTRL” setup, touch

“NULL” icon to call “Select” message popup and move the switch or stick with your choice then

the switch or stick is set to Q.LINK switch or stick. To set “DELAY” function, touch “0.0s” icon to

activate in blue and set the delay time with “INC” and “DEC” buttons. DELAY indicates the time till

Q.LINK start to work after Q.LINK is switched on

FUNCTION MENU (Airplane, Gilder)

GRAUPNER mz-24 HOTT Operating Instructions

Other manuals for GRAUPNER mz-24 HOTT