66
- GENERAL MOD
You may decide the voice functions of GENERAL MOD to use or not to use. 15 voice func-
tions, CELL1, CELL2, CELL3, CELL4, CELL5, CELL6, S1-VOLT, S2-VOLT, S1-TEMP, S2-
TEMP, RPM, ALT, CURRENT, POWER, and CAP, are available
Touch “>>” icon to call the GENERAL MOD setup page. All the functions are marked with red
dot by default in the page. Touch the function icon that you don’t want to use then the red dot
is switched to white dot. The functions marked with white dot are deactivated. Touch “BACK”
icon to return to VOICE TRIGGER setup page.
Touch
Touch
Touch
Touch
- RECEIVER
You may decide the voice functions of receiver to use or not to use. 4 voice functions, ,
STRENGTH, RX VOLT, and LOW VOLT, are available
Touch “>>” icon to call the receiver setup page. All the functions are marked with red dot by default
in the page. Touch the function icon that you don’t want to use then the red dot is switched to white
dot. The functions marked with white dot are deactivated. Touch “BACK” icon to return to VOICE
TRIGGER setup page.
Touch
Touch
- TRANSMITTER
You may select the voice functions to use or not to use. 6 voice functions, TX VOLT, MODEL TIME,
BATT TIME, TIMER1, TIMER2, and CURRENT TIME, are available
Touch “>>” icon to call the transmitter setup page. All the functions are marked with red dot by
default in the page. Touch the function icon that you don’t want to use then the red dot is switched
to white dot. The functions marked with white dot are deactivated. Touch “BACK” icon to return to
VOICE TRIGGER setup page.
Touch
Touch
To Next Page
Loading...
Need help?
General
