Gravotech M20 - Safety Guidelines; General Safety Recommendations

16
M_M20 series V3_EN_C
G. Safety
1. Recommendations and safety
 Personnel safety
Turno󰓐themachinebeforebeginninganycleaning,maintenanceorrepair
procedure.
• Onlytrainedpersonnelawareoftherisksposedbythemachineareauthorizedtointegrate,startanduse
it (training tool: operating and maintenance manual).
• The machine is designed for light engraving only and under no circumstances should it be used for other
applications.
• Do not use this machine for routing or intensive cutting operations.
• Donotusethismarkingequipmentinanexplosiveenvironment.
• Never hold the materials for engraving in hands. Use only Gravotech clamping systems designed for the
machine.
• Duringengravingoperations,usethismachinewitha(regulatingorsuction)noseinordertoprevent󰘱ying
swarf.
• Donotstartengravingwithout󰘰rstensuringthattheobjecttobeengravedissecurelyclamped.
• Nevertakeholdofthematerialforengravingwhenengravingisinprogress.
• Interrupt engraving by means of the pause function provided for this purpose on the machine control panel.
• Keep away from the area above the machine. Keep clear of the tool-holder.
• Ensurethatpeoplearekeptclearoftheareaoftravelofthemovingpartsofthemachineandthatno
objectsriskobstructingtheirmovement.
• Warning: Hazardous moving parts - Keep 󰘰ngers and other body parts away. To prevent any risk of
crushing,avoidplacingthehandsinthelocationsidenti󰘰ed.
• Thisequipmenthasundergoneacomprehensivecerti󰘰cationprocess,coveringoperationuptoanaltitude
of 3000 m (9 842.490 ft). The commercial conditions of warranty are maintained for use beyond the limit
of 3000 m (9 842.490 ft).
Theuseofsafetyglassesisrecommendedforprotectionagainst󰄉yingswarf.
To prevent any risk of cutting injury, wear protective gloves when handling the tool.