Gravotech M20 - Machine Operation Safety; Safety Label Identification

17
M_M20 series V3_EN_C
Safety
 Handling the machine
• Any operations on the machine must be carried out under the responsibility of an adult.
Do not allow children to touch the machine, leads or cables.
• Nevermovethetoolholdermanually,exceptintheeventofamechanicalblockageofthemachine.
• In the event of an extended period of non-use, unplug the power cable and protect the machine.
• Neverpourorspillliquidonthemachine(drinks,cleaningproducts,etc.)exceptwhererecommendedby
Gravotech.
• Do not place any object on the machine other than the object to be engraved.
• Use the machine with Gravotech tools only.
• This machine is designed for a single user only. Do not allow its operation by multiple users at the same
time.
If there is a major problem or the machine is jammed
mechanically: Put the On/O󰘯 switch in the "O" (O󰘯)
position.
 Required safety labels
CAUTION
LASER RADIATION
Do not stare into beam.
Laser diode
Wavelength: 630-680 nm
Output (Maximum) < 1 mW
CLASS 2 LASER PRODUCT