Gravotech M20 - Regulation Observance

C. Regulation observance
Last updated: 06/2021
EC declaration of conformity or declaration of incorporation supplied with the machinery
Type of machine Directives - Standards
Dotpeenmarking:Machine
Impact p, Impact eZ p, Impact m, Impact eZ m
Scribingmarking:Machine
M10, M10 Jewel
Sharpening by grinding: Machine
CG30
Bevelling: Machine
B6
Engraving by milling: Machine
IM3
M20 V3
M40, M40G
IS200, IS400, IS400 Volume
IS6000, IS7000, IS8000 - XP - XP Milling
Dotpeenmarking:Transportablemachinery-Partlycompletedmachinery
XF530p, XF530m
Dotpeenmarking:Partlycompletedmachinery
XF510Cp-Sp-Dp, XF510Cm-Sm-Dm, XE310Cp-Sp
Scribingmarking:Partlycompletedmachinery
XF510Cr-Sr-Dr, SV510
CCU,Rack,TouchPad
UC500 SV, UC Laser, XCOM
RacksIS
Laser fume extractor:
ES10, ES30, ES50, ES Mini
LE120HP, LE140HP, LE150HP, LE190HP, LNI900
Accessory: Partly completed machinery
Rotary APF, Laser APF, Dotpeen APF
eZ150
Mini-Inline
Cylinder attachment:
RD1, RD2, RDM, RD Jewel
Rotary Device for LS100, Rotary Device for LS100Ex, Rotary Device for
LS900/LS1000XP
- Low voltage: 2014/35/EU
- EMC: 2014/30/EU
- RoHS 2: 2011/65/EU
CO2and󰘰berlasermarking:Machine(gantry)
LS100 Energy, LS100 Ex Energy, LS900 Energy
LS100, LS100 Ex, LS900, LS900 XP, LS1000XP
LS100 Ex Fibre, LS900 Fibre
LS900 Edge
CO2,DPSSand󰘰berlasermarking:Machine(galvo)
LW2 Touch, LW3, WeLase (Cxx, Fxx, Gxx, Hxx),
Laser Solution Hybrid-Series (standard version, Version Energy), Laser
Solution Green-Series (standard version, Version Energy), Laser Solution
CO2-Series (standard version), FIBER Energy
CO2,DPSSand󰘰berlasermarking:Partlycompletedmachinery(galvo)
– Class 4
FIBER Standard, FIBER Premium
- Low voltage: 2014/35/EU
- EMC: 2014/30/EU
- RoHS 2: 2011/65/EU
-Safetyoflaserproducts-Part1:Equipmentclassi󰘰cationand
requirements: EN 60825-1:2008
- Safety of laser products - Part 4: Laser guards: EN 60825-4+A1+A2:2006
7M_M20 series V3_EN_C