Gravotech M20 - X84; Cutting Out Kit (Optional)

55
M_M20 series V3_EN_C
Adaptable accessories
 Cuttingoutkit(optional)
Allows you to cut thin metal plates.
Mounts directly on the vice.
Clamptheplateandcheckthatitis󰘰rmlyheldinplace.
Delivered with 3 non-slip martyr plates. Holds the cutting
plate in place. Protects the cutting table.
Cut between 0.05 mm (0.002 in) and 0.1 mm (0.004 in)
deeper than the plate to ensure that the plate is cut
properly.
Use lubricating gel to improve cutting quality and tool life.
Plate dimensions (Maximum): 80 mm (3.150 in) x 120 mm (4.724 in)
Platethickness(Maximum):8mm(0.315in)
Tools Reference
15°
48713
0° - 2 lips
48657
Lubricant
83957