Gravotech M20 - Noise Emission of the Machine (ISO 11201 Standard); Electrical Characteristics; Environment

84
M_M20 series V3_EN_C
Technicalspeci󰘰cations
1
2
1. Diameter 1: for exterior clamping
2. Diameter 2: for interior clamping
3. Noise emission of the machine (ISO 11201 standard)
L
Aeq
- when awaiting engraving 51 dB (A) +/- 1
L
Aeq
- during nominal engraving 69 dB (A) +/- 2
L
pc
peak - peak at rated engraving < 89 dB (C)
4. Electrical characteristics
Electronics Integrated
Nominalvoltage/Typeofcurrent External power supply unit
Input: AC 100 - 240 V
Output: 24 V
Current Maximum: 1.7 - 0.75 A
Frequency 50-60 Hz
Consumption 180 W
Protection(s) -
5. Environment
Operating temperature 5 °C (41 °F) - 40 °C (104 °F)
Storage temperature -5 °C (23°F) - 45 °C (113 °F)
Humidity level 20 - 80 %