Grundfos TPE2 - 35 Factory Settings

35. Factory settings
● Function is enabled.
❍ Function is disabled.
- Function is not available.
Settings TPE3, TPE3 D TPE2, TPE2 D
Setpoint Auto 67 %
Operating mode Normal Normal
Control mode AUTOADAPT Const. curve
Date and time ● ●
FLOWLIMIT ❍ -
Automatic Night Setback ❍ -
Temperature influence ❍ -
Buttons on product ● ●
Controller (Controller settings)
T
i
1.0 0.5
K
p
8.0 0.5
Operating range
Min. 25 % 25 %
Max. 100 % 100 %
Ramps ❍ ❍
Ramp-up 1 second 1 second
Ramp-down 3 seconds 3 seconds
Number (Pump number) 1 1
Radio communication ● ●
Analog input 1 ❍ ❍
Analog input 2 ❍ ❍
Analog input 3 ❍ ❍
Built-in Grundfos sensor ● -
Grundfos differential pressure sensor Feedback sensor -
Grundfos temperature sensor
12)
❍
Pt100/1000 input 1
❍/
Other function, liquid
temperature
12)
❍
Pt100/1000 input 2 ❍ ❍
Digital input 1 ❍ ❍
Digital input 2 ❍ ❍
Digital in/output 3 ❍ ❍
100
English (GB)