Grundfos TPE2 - Buttons on Product (Enable;Disable Settings); Delete History; Define Home Display; Display Settings

17.33 "Buttons on product" (Enable/disable
settings)
Pump variant
"Buttons on product"
(Enable/disable settings)
TPE3, TPE3 D ●
TPE2, TPE2 D ●
In this display, you can disable the possibility of
making settings.
Grundfos GO
If you set the buttons to "Not active", the buttons on
the standard control panel are disabled. If you set the
buttons to "Not active" on pumps with an advanced
control panel, see below.
Advanced control panel
If you have disabled the settings, you can still use the
buttons to navigate through the menus but you
cannot make changes in the Settings menu.
When you have disabled the possibility to make
settings, the
Setpoint
5.00 bar
Operaring mode
Normal
Actual controlled value
4.90 bar
Control mode
Const. pressure
Status Settings Assist
1 2 3
56789
symbol appears in the display.
To unlock the pump and allow settings, press and
simultaneously for at least 5 seconds.
Standard control panel
The
button always remains active but you can only
unlock all other buttons on the pump with Grundfos
GO.
Factory setting
See section Factory settings.
Related information
35. Factory settings
17.34
Delete history
Pump variant Delete history
TPE3, TPE3 D ●
TPE2, TPE2 D ●
This menu is only available in the advanced control
panel.
In this menu, you can delete the following historic
data:
• Delete work log.
• Delete heat energy data.
• Delete energy consumption.
17.35
Define Home display
Pump variant Define Home display
TPE3, TPE3 D ●
TPE2, TPE2 D ●
This menu is only available in the advanced control
panel.
In this menu, you can set the Home display to show
up to four user-set parameters.
17.36 Display settings
Pump variant Display settings
TPE3, TPE3 D ●
TPE2, TPE2 D ●
This menu is only available in the advanced control
panel.
In this menu you can adjust the display brightness
and set whether or not the display is to turn off if no
buttons have been activated for a period of time.
17.37 Store settings (Store actual settings)
Pump variant Store actual settings
TPE3, TPE3 D ●
TPE2, TPE2 D ●
Grundfos GO
In this menu, you can store the actual settings for
later use in the same pump or in other pumps of the
same type.
Advanced control panel
In this menu, you can store the actual settings for
later use in the same pump.
72
English (GB)