27.2.2 Blanking flanges
For twin-head pumps, a blanking flange with a pump
housing gasket is available.
TM057921
Fitting the blanking flange
If one pump requires service, fit the blanking flange to
allow the other pump to continue operating.
28. Cleaning the product
WARNING
Electric shock
Death or serious personal injury
‐ Switch off the power supply to the
motor and to the signal relays. Check
that the terminal box cover is intact
before spraying water on the product.
In order to avoid condensation in the motor, let the
motor cool down before spraying it with cold water.
93
English (GB)
To Next Page
Loading...
