Grundfos TPE2 - Number (Pump Number); Radio Communication (Enable;Disable Radio Comm.); Language; Date and Time (Set Date and Time)

17.28 Number (Pump number)
Pump variant
Number
(Pump number)
TPE3, TPE3 D ●
TPE2, TPE2 D ●
You can allocate a unique number to the pump. This
makes it possible to distinguish between pumps in
connection with bus communication.
Factory setting
See section Factory settings.
Related information
35. Factory settings
17.29 Radio communication (Enable/disable
radio comm.)
Pump variant
Radio communication (Enable/
disable radio comm.)
TPE3, TPE3 D ●
TPE2, TPE2 D ●
You can set the radio communication to either
enabled or disabled. You can use this function in
areas where radio communication is not allowed.
IR communication remains active.
Factory setting
See section Factory settings.
Related information
35. Factory settings
17.30
Language
Pump variant Language
TPE3, TPE3 D ●
TPE2, TPE2 D ●
This menu is only available in the advanced control
panel.
In this menu you can select the desired language. A
number of languages are available.
17.31
Date and time (Set date and time)
Pump variant
Date and time
(Set date and time)
TPE3, TPE3 D ●
TPE2, TPE2 D ●
You can set date and time as well as how they are to
be shown in the display:
• Select date format:
YYYY-MM-DD
DD-MM-YYYY
MM-DD-YYYY.
• Select time format:
HH:MM 24-hour clock
HH:MM am/pm 12-hour clock.
• Set date
• Set time.
Factory setting
See section Factory settings.
Related information
35. Factory settings
17.32 Unit configuration (Units)
Pump variant Unit configuration
TPE3, TPE3 D ●
TPE2, TPE2 D ●
In this menu you can select between SI and US units.
The setting can be made generally for all parameters
or customised for each individual parameter.
Factory setting
See section Factory settings.
Related information
35. Factory settings
71
English (GB)