Grundfos TPE2 - 24 Identification of Functional Module

10. If the CIM module is supplied with an FCC label,
then place this on the terminal box.
FCC
TM057028
FCC label
11. Fit the terminal box cover (B) and cross-tighten
the four mounting screws (A) to 6 Nm.
Make sure that the terminal box cover is
aligned with the control panel. See section
Changing the position of the control panel.
Related information
26. Changing the position of the control panel
24. Identification of functional module
You can identify the module in one of the following
ways:
Grundfos GO
Select the Fitted modulesmenu under Status.
Pump display
If the pump is fitted with the advanced control panel,
select Fitted modulesmenu under Status.
Motor nameplate
You can identify the fitted module on the motor
nameplate.
Env.Type :
Serial no :
SF CL:
PF:
PB
FM
HMIEff
n max:
CIMWgt
:
DE
:
kg
NDE
:
T
amb
:
:
F AA
V
~
P.C.
:
Made in Hungary
OUTPUT
VARIANT
INPUT
TEFC
Type
:
P.N.
:
U
in
:
I
1/ 1
:
f
in
Hp
Hz
P2
I SF Amp:
rpm
: : :
:
:
:
:
Xxxxxxxxxxx
E.P. Motor
DK - 8850 Bjerringbro, Denmark
PB
FM
HMI
CIM
VARIANT
Hp
rpm
:
:
:
:
TM061889
Identification of functional module
Variant Description
FM 200 Standard functional module
FM 300 Advanced functional module
89
English (GB)