Grundfos TPE2 - 15 Home Display; Start-Up Guide

15. Home display
Setpoint
5.00 bar
Operating mode
Normal
Actual controlled value
4.90 bar
Control mode
Const. pressure
Status Settings Assist
Home
1 2 3 4
56789
TM064516
Example of Home display
Pos. Symbol Description
1
Setpoint
5.00 bar
Operaring mode
Normal
Actual controlled value
4.90 bar
Control mode
Const. pressure
Status Settings Assist
1 2 3
56789
Home
This menu shows up to four
user-defined parameters. You
can select parameters shown as
shortcut icon
, and when
pressing
you go directly to the
Settings display for the selected
parameter.
2 -
Status
This menu shows the status of
the pump and system as well as
warnings and alarms.
3 -
Settings
This menu gives access to all
setting parameters. You can
make detailed settings of the
pump in this menu.
See section Description of
functions.
4 -
Assist
This menu enables assisted
pump setup, provides a short
description of the control modes
and offers fault advice.
See section Assist.
5
Setpoint
5.00 bar
Operaring mode
Normal
Actual controlled value
4.90 bar
Control mode
Const. pressure
Status Settings Assist
1 2 3
56789
Indicates that the pump has
been stopped via the
Setpoint
5.00 bar
Operaring mode
Normal
Actual controlled value
4.90 bar
Control mode
Const. pressure
Status Settings Assist
1 2 3
56789
button.
Pos. Symbol Description
6
Setpoint
5.00 bar
Operaring mode
Normal
Actual controlled value
4.90 bar
Control mode
Const. pressure
Status Settings Assist
1 2 3
56789
Indicates that the pump is
functioning as master pump in a
multipump system.
7
Setpoint
5.00 bar
Operaring mode
Normal
Actual controlled value
4.90 bar
Control mode
Const. pressure
Status Settings Assist
1 2 3
56789
Indicates that the pump is
functioning as a slave pump in a
multipump system.
8
Setpoint
5.00 bar
Operaring mode
Normal
Actual controlled value
4.90 bar
Control mode
Const. pressure
Status Settings Assist
1 2 3
56789
Indicates that the pump is
operating in a multipump
system. See section "Multipump
setup" (Setup of multi-pump
system).
9
Setpoint
5.00 bar
Operaring mode
Normal
Actual controlled value
4.90 bar
Control mode
Const. pressure
Status Settings Assist
1 2 3
56789
Indicates that the possibility to
make settings has been
disabled for protective reasons.
See section "Buttons on
product" (Enable/disable
settings).
Related information
17.33 "Buttons on product" (Enable/disable settings)
17.45 Assist
17.49 Multipump setup (Setup of multi-pump
system)
15.1 Start-up guide
The pump incorporates a startup guide which is
started at the first startup. See section Run start-up
guide. After the startup guide, the main menus
appear in the display.
Related information
17.42 Run start-up guide
33
English (GB)