16. Grundfos GO
The pump is designed for wireless radio or infrared
communication with Grundfos GO.
Grundfos GO enables setting of functions and gives
access to status overviews, technical product
information and actual operating parameters.
Grundfos GO offers the following mobile interfaces,
MI.
TM066256
Grundfos GO communicating with the pump via
radio or infrared connection, IR
Pos. Description
1
Grundfos MI 301:
Separate module enabling radio or infrared
communication. You can use the module in
conjunction with an Android or iOS-based
smart device with Bluetooth connection.
16.1 Communication
When Grundfos GO initiates communication with the
pump, the indicator light in the middle of Grundfos
Eye flashes green. See section Grundfos Eye.
Furthermore, on pumps fitted with an advanced
control panel a text appears in the display saying that
a wireless device is trying to establish connection.
Press
on the pump in order to establish connection
with Grundfos GO or press
Setpoint
5.00 bar
Operaring mode
Normal
Actual controlled value
4.90 bar
Control mode
Const. pressure
Status Settings Assist
1 2 3
56789
to reject connection.
Establish communication using one of these
communication types:
• radio communication
• infrared communication.
Related information
21. Grundfos Eye
16.1.1 Radio communication
Radio communication can take place at distances up
to 30 m. The first time Grundfos GO communicates
with the pump, you must enable communication by
pressing
or on the pump control panel. Later
when communication takes place, the pump is
recognized by Grundfos GO and you can select the
pump from the "List" menu.
16.1.2 Infrared communication
When communicating via infrared light, Grundfos GO
must be pointed at the pump control panel.
38
English (GB)
To Next Page
Loading...
