14. Advanced control panel
Pump variant
Fitted as
standard
Option
TPE3, TPE3 D ● -
TPE2, TPE2 D - ●
TM054849
Advanced control panel
Pos. Symbol Description
1
Grundfos Eye
Shows the operating status of the
pump.
For further information, see
section Grundfos Eye.
2 - Graphical colour display.
3 Goes one step back.
4
Navigates between main menus,
displays and digits.
When you change the menu, the
display always shows the top
display of the new menu.
Navigates between submenus.
Changes value settings.
Note: If you have disabled the
possibility to make settings with
the Enable/disable settings
function, then you can enable it
again temporarily by pressing
these buttons simultaneously for
at least 5 seconds. See section
"Buttons on product" (Enable/
disable settings).
Pos. Symbol Description
4
Saves changed values, resets
alarms and expands the value
field.
Enables radio communication
with Grundfos GO and other
products of the same type.
When you try to establish radio
communication between the
pump and Grundfos GO or
another pump, the green
indicator light in Grundfos Eye
flashes. A note also appears in
the pump display stating that a
wireless device wants to connect
to the pump. Press
on the
pump control panel to allow radio
communication with Grundfos
GO and other products of the
same type.
5
Makes the pump ready for
operation, and starts and stops
the pump.
Start:
If you press the button when the
pump is stopped, the pump only
starts if no other functions with
higher priority have been
enabled. See section Priority of
settings.
Stop:
If you press the button when the
pump is running, the pump is
always stopped. When you stop
the pump via this button, the
icon appears in the bottom of the
display.
6 Goes to the Home menu.
Related information
17.33 "Buttons on product" (Enable/disable settings)
20. Priority of settings
21. Grundfos Eye
32
English (GB)
To Next Page
Loading...
