18
CONNECTION AND PREPARATION
_______________________________________
6 Press »OK« on the remote control to confirm the setting.
– The remote control display reads: »SELECT LEFT LS AND PRESS
OK
«, the orange indicator in the »POWER« button on the left
loudspeaker flashes, the orange indicator in the »POWER« button on the
right loudspeaker li
ghts up continuously.
Note:
If you want to use the left loudspeaker as a right loudspeaker, press »+«
once. The orange indicator in the »POWER« button on the right
loudspeaker flashes.
7 Press »OK« on the remote control to confirm the setting.
– The remote control display reads: »CONFIRM RIGHT LS WITH OK«,
the orange indicator in the »POWER« button on the left loudspeaker
lights up continuously, the orange indicator in the »POWER« button on
the right loudspeaker flashes.
8 Press »OK« on the remote control to confirm the setting.
– The remote control display reads: »READY«, the orange indicators in both
»POWER« buttons on the loudspeakers li
ght continuously.
9 Press »OK« on the remote control to confirm the setting.
– The remote control display reads: »TUNER 87.50 MHz«. A station
name may appear instead of the frequency display.
– Both loudspeakers are switched on automatically and the green indicators
in the »POWER« buttons light up continuously.
Note:
If the loudspeakers are not switched on automatically, switch them on
manually by pressing »VOLUME
xx
«.
If you install more pairs of loudspeakers, see the ”MULTIPLE ROOM MODE”
section starting on pages 50 to 52 for instructions.
INSTALL
READY
INSTALL
CONFIRM RIGHT LS
WITH OK
TUNER
87.50 MHz
MENU INFO MEMO
INSTALL
SELECT LEFT LS
AND PRESS OK
To Next Page
Loading...
Need help?
General
