Temperature
The ambient temperature must remain between -10 and +40 °C. Make sure
that the product is not subjected to great temperature fluctuations.
Air humidity
The air humidity must be below 75%.
9.3 Decommissioning
9.3.1 Shutdown
Do not empty the lubrication lines and the gearbox when shutting down the
product.
To shut down the product, proceed as follows:
1 Switch off lubrication system
2 Remove lubrication cartridge
3 Remove connecting cable
4 Disconnect the lubrication lines from the hydraulic outputs
The product has been shut down
9.3.2 Cleaning, rust-proofing
Clean away any dirt and dust from the product. Clean the product thor-
oughly. Dispose of any cloths soaked in oil or grease in an environmentally
friendly manner. Ü2113
Apply corrosion protection to all bright parts.
9.3.3 Identification
Label the product with the following data:
• Date of decommissioning
• Internal machine number/name
• Additional data as per internal guidelines
Decommissioning, storage OPERATING MANUAL Lubrication system FlexxPump4D
9007202674126091_v2.0_EN-US
108
To Next Page
Loading...