GUDEL FlexxPump4 D - Tab. 7-13 Inspection Table

Inspection
point
Description Measures
Lubrication lines Check lubrication lines
for kinks and air pock-
ets
ü
û
Remove kinks and air pock-
ets immediately
Function Check function Replace defective compo-
nents immediately
Tab.7-13 Inspection table
NOTE
Lubricating film missing
A missing lubricating film on rails and racks leads to damage to the product.
This results in operational failure.
• Ensure that there is always a lubricating film on rails and racks during oper-
ation
• Perform the described tasks at the specified times
• Perform lubrication work at the latest when the first signs of tribocorro-
sion (reddish discoloration of the track) are visible
• Adjust lubrication interval if necessary
Maintenance OPERATING MANUAL Lubrication system FlexxPump4D
9007202674126091_v2.0_EN-US
88