EasyManua.ls Logo

GUDEL FlexxPump4 D - Tab. 3-3 Temperature Ranges: Splitter

Default Icon
151 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3.3.2 Splitter
3.3.2.1 Temperature ranges
The following temperature ranges and humidity apply:
Product life phase Temperature range Air humidity
Transport -10 to +60 °C
Operation +10 to +80°C Up to and at 85 %,
condensation forma-
tion is not permissible
Storage -10 to +40°C Up to 75 %
Tab.3-3 Temperature ranges: Splitter
3.3.2.2 Accuracy of the lubricant distribution
The accuracy of the lubricant distribution is ±10%. The accuracy is valid up to
a pressure difference of less than 6 bar.
3.3.2.3 Minimum lubrication quantity
Splitters only function correctly if > 0.5 cm
3
of lubricant is produced at their
input per lubrication cycle.
3.3.2.4 Maximum pressure
The maximum pressure at the input of splitters is 110 bar.
3.3.3 Lubricant amount
The lubricant cartridge contains 400 ml of lubricant. Running empty is moni-
tored by integrated sensors.
3.3.4 Shelf life of Güdel H1 lubricant
The date of filling is shown on the lubricant cartridge. The Güdel H1 lubricant
has a shelf life of two years from date of filling. This applies to sealed original
containers stored under the required storage conditions.
Product description OPERATING MANUAL Lubrication system FlexxPump4D
9007202674126091_v2.0_EN-US
30

Table of Contents

Related product manuals