GUDEL FlexxPump4 D - Fig. 9 -2 Pre-Lubricating Rails and Racks; Pre-Lubricating Rails and Racks; Tab. 9-2 Lubricant: Rails, Racks, and Pinions

9.4.1.2 Pre-lubricating rails and racks
ü
û
Fig.9-2 Pre-lubricating rails and racks
Lubrication ex works Specifications Lubricant quan-
tity
ÜChapter7.2.2.1, 274 ÜChapter7.2.2.1,
274
Tab.9-2 Lubricant: Rails, racks, and pinions
Pre-lubricate the rails and racks as follows:
Prerequisite: The rails and racks have been cleaned.
1 Switch off the system and secure it with a padlock against being switched
on again
2 Pre-lubricate rails and racks according to illustration
The rails and racks have been pre-lubricated.
• Check hydraulic lines for air pockets and kinks
Decommissioning, storage
OPERATING MANUAL Lubrication system
FlexxPump4D
9007202674126091_v2.0_EN-US
111