GUDEL FlexxPump4 D - Tab. 7-8 Maintenance Intervals in Shift Operation (5 Days a Week); Tab. 7-9 Maintenance Intervals in Shift Operation (7 Days a Week)

Exclusion of gaskets and bearings
The maintenance interval specifications apply without gaskets and bearing.
Gaskets are subject to special wear and are not considered. In the case of
gearboxes, the bearings are also excluded.
The definition is based on 5/7 working days per week.
Operating
hours
1-shift opera-
tion
2-shift opera-
tion
3-shift opera-
tion
150 every 4 weeks every 2 weeks weekly
2,000 yearly every 6 months every 4 months
6,000 every 3 years every 1.5 years yearly
10,000 every 5 years every 2.5 years every 20 months
20,000 every 10 years every 5 years every 3.3 years
Tab.7-8 Maintenance intervals in shift operation (5 days a week)
Operating
hours
1-shift opera-
tion
2-shift opera-
tion
3-shift opera-
tion
150 every 18 days every 9 days every 6 days
2,000 every 9 months every 4.5
months
every 3 months
6,000 every 2.5 years every 15 months every 10 months
10,000 every 4 years every 2 years every 16 months
20,000 every 7.75 years every 3.8 years every 2.5 years
Tab.7-9 Maintenance intervals in shift operation (7 days a week)
Maintenance OPERATING MANUAL Lubrication system FlexxPump4D
9007202674126091_v2.0_EN-US
78