GUDEL FlexxPump4 D - Cleaning the Rails and Racks; Fig. 9 -1 Cleaning Rails and Racks; Tab. 9-1 Cleaning Agents: Rails and Racks

9.4.1.1 Cleaning the rails and racks
DANGER
Moving the axis
The work requires moving the axis. This can lead to severe or fatal injuries!
• Ensure that no persons are in the danger area while the axis is moving
CAUTION
Risk of injury
There is a risk of cuts and crushing in the area of the gearbox, pinion, and
racks.
• Wear appropriate protective clothing
Fig.9-1 Cleaning rails and racks
Cleaning agents
mild universal cleaner free from aromatic compounds (e.g. Motorex OPAL
5000)
Tab.9-1 Cleaning agents: Rails and racks
Clean the rails and racks as follows:
1 Switch off the system and secure it with a padlock against being switched
on again
2 Clean the rails and racks thoroughly
The rails and racks have been cleaned.
Decommissioning, storage OPERATING MANUAL Lubrication system FlexxPump4D
9007202674126091_v2.0_EN-US
110