GUDEL FlexxPump4 D - Fig. 7 -6 Cleaning and Checking Lubrication System; Tab. 7-12 Cleaning Agents: Lubrication System: Lubrication Pump, Lubrication Lines, Other Components

7.3.3 Maintenance tasks after 10,000 hours
7.3.3.1 Cleaning and checking lubrication system
Fig.7-6 Cleaning and checking lubrication system
Cleaning agents
mild universal cleaner free from aromatic compounds (e.g. Motorex OPAL
5000)
Tab.7-12 Cleaning agents: Lubrication system: Lubrication pump, lubrication lines, other components
Check the lubrication system according to the following table.
Inspection
point
Description Measures
Contamination Check the components
for contamination:
• Lubricant pump
• Lubrication lines
• Other components
Immediately clean away any
contamination
Loss of lubricant Check lubrication sys-
tem and its surround-
ings for traces:
• Puddles of lubricants
and lubricant traces
on the floor or in
the drip sheets
• Leaks or ripped out
lubrication lines
• Remove puddles of lubri-
cants and lubricant traces
on the floor or in the
drip sheets
• Replace leaks of ripped
out lubrication lines
Maintenance
OPERATING MANUAL Lubrication system
FlexxPump4D
9007202674126091_v2.0_EN-US
87