GW Instek GDS-2000A Series - Page 221

HARDCOPY KEY
221
6. Press the Hardcopy key to save the
file*.
A message will appear when the
save is successful.
Hardcopy
Image File
Format
1. For image files the file format can
be selected with the File Format
key.
Format:
BMP, PNG
Ink Saver
2. To have a white background, set
Ink Saver to On.
Ink Saver On
Ink Saver Off
Note
*Each time the Hardcopy key is used to save
waveforms or setup files, the files are saved into a new
directory each time. The save directory is labeled
ALLXXX, where XXX is incremented with each save.
This directory is created in either the internal memory
or to a USB flash drive.