REMOTE CONTROL CONFIG
235
GPIB Functionality Check
To check that the GPIB connection is working,
National Instruments Measurement & Automation
Explorer (MAX) can be used. The following
function check is based on version 4.6.2.
For further information about National
Instruments, please see the NI website at
www.ni.com.
1. Start the NI Measurement and
Automation Explorer (MAX)
program. Using Windows, press:
Start>All Programs>National
Instruments>Measurement & Automation
2. From the Configuration panel access;
My System>Devices and Interfaces>GPIB0
To Next Page
Loading...
Need help?
General
