GW Instek GDS-2000A Series - Page 252

GDS-2000A Series User Manual
252
Control Panel
Function
Autoset
Single-button, automatic setup of all channels for
vertical, horizontal and trigger systems, with undo
Autoset
Save Setup
20set
Save Waveform
24set
Display
TFT LCD Type
8" TFT LCD SVGA color display
Display
Resolution
800 horizontal × 600 vertical pixels (SVGA)
Interpolation
Sin(x)/x & Equivalent Time Sampling
Waveform
Display
Dots, vectors, variable persistence (16ms~10s),
infinite persistence
Waveform
Update Rate
80,000 waveforms per second, maximum
Display
Graticule
8 x 10 divisions
Display Mode
YT, XY
Interface
RS232C
DB-9 male connector X1
USB Port
USB 2.0 host port X2,
USB 2.0 device port X1: USB 2.0 full speed (CDC-
ACM)
Ethernet Port
(LAN)
RJ-45 connector, 10/100Mbps with HP Auto-MDIX,
IEEE802.3 (option)
Go-NoGo BNC
5V Max/10mA TTL open collector output
SVGA Video
Port
SVGA output (option)
GPIB
GPIB module, IEEE488.2 (option)
Kensington
Style Lock
Rear-panel security slot connects to standard
Kensington-style lock.
Logic Analyzer
(Option)
Sample Rate
500MSa/s
Bandwidth
200MHz
Record Length
2M max/ch
Input Channels
16 Digital (D15 - D0) or 8 Digital (D7~D0)
Trigger type
Edge, Pattern, Pulse Width, Serial bus (I2C, SPI,
UART)
Thresholds
Quad-D0~D3, D4~D7. . . . Thresholds
Threshold
selections
TTL, CMOS, ECL, PECL, User Defined
User-defined
Threshold
Range
±10V
Maximum
Input Voltage
±40V
Minimum
Voltage Swing
±500mV