To Next PageTo Next PageHow to troubleshoot input failure on AC-powered H3C Switch?
To troubleshoot an AC-powered H3C switch that's not receiving power, make sure the AC power cord is properly connected to both the switch and a working AC outlet. Also, ensure the switch's operating temperature is within the acceptable range and that the power module has adequate ventilation. Overheating can trigger a protective shutdown.
What to do if there is an input failure on an RPS and AC-powered H3C switch?
If your H3C switch, powered by both RPS and AC, is experiencing input failure, verify that the AC power cord is securely connected to the switch and a functioning AC outlet. Also, check the connection to the RPS and confirm the RPS is operating correctly. Ensure the switch's temperature is within the acceptable range and that the power module has sufficient ventilation.
How to fix no display on the configuration terminal of H3C S5000V3-EI Switch?
To resolve a missing display on the configuration terminal of your H3C switch, first ensure the power system and the switch itself are working correctly. Verify the console cable is properly connected and not faulty. Finally, confirm that your terminal settings are: Baud rate—9600, Data bits—8, Parity—None, Stop bits—1, Flow control—None.
General