H3C S5500-EI Series - Figure 3-33 Appearance of a Dual-Port 10 GE XFP Interface Module; Figure 3-34 Front Panel of a Dual-Port 10 GE XFP Interface Module

Quick Start
H3C S5500-EI Series Ethernet Switches
Chapter 3 Installation
3-32
II. Appearance and front panel of a dual-port 10 GE XFP
interface module
Figure 3-33 Appearance of a dual-port 10 GE XFP interface
module
Figure 3-34 Front panel of a dual-port 10 GE XFP interface
module
III. Installation procedure
1) Wear an ESD-preventive wrist strap and verify the
ESD-preventive wrist strap is properly grounded. Then take
out the XFP interface module from the package.