H3C UniServer R4900 G6 Ultra - B;D;F Information

40
Figure 63 PCIe slot numbering on a mid GPU adapter
IMPORTANT:
You cannot configure both rear GPU modules and mid GPU adapters on the same server.
B/D/F information
You can obtain B/D/F information by using one of the following methods:
• BIOS log—Search the dumpiio keyword in the BIOS log.
• UEFI shell—Execute the pci command. For information about how to execute the command,
execute the help pci command.
• Operating system—The obtaining method varies by OS.
 For Linux, execute the lspci command.
If Linux does not support the lspci command by default, use the software package
manager supported by the operating system to obtain and install the pci-utils package.
 For Windows, install the pciutils package, and then execute the lspci command.
 For VMware, execute the lspci command.