Harris P7300 SERIES - Page 64

MM-013994-001, Rev. J
64
STATUS ICONS
Steady – Indicates the current channel is analog. Appears in the 7
th
position of the display.
Animated (rotates clockwise) – Scan Mode enabled. Appears in the 9
th
position of the display.
If icon is not visible – scan is disabled.
Steady – Priority 1 group or channel. Appears in the 10
th
position of the display.
Steady – Priority 2 group or channel. Appears in the 10
th
position of the display.
Steady – Group or channel in scan list. Appears in the 10
th
position of the display.
Steady – Special call mode (individual or telephone). Appears in the 11
th
position of the
display.
Steady – Battery charge indicators. Appear in the 12
th
position of the display.
Flashing – Low battery indicator.
Figure 10-6: Full Cycle Battery Charge Indicator
The battery charge indicators illustrate approximate level only, based on battery voltage. Refer to Figure
10-6.