Mechanical installation
20 A0608-14.0 HBM: public T10F
direction of rotation. If the measurement flange moves in
the direction of the arrow, connected HBM measuring
amplifiers deliver a positive output signal (0 V ... +10 V).
6.3 Installation options
In principle, there are two possibilities for torque flange
mounting: with the antenna ring complete or dismantled.
We recommend mounting as described in chapter 6.3.1.
“Installation without dismantling the antenna ring” If
installation in accordance with chapter 6.3.1 is not
possible, (e.g. in the case of subsequent stator
replacement or mounting with a speed measuring
system), you will have to dismantle the antenna ring. It is
essential in this case to comply with the notes on
assembling the antenna segments (see chapter 6.5
“Mounting the stator” on page 28 and chapter 6.7
“Fitting the slotted disc (speed measuring system)” on
page 33).
To Next Page
Loading...
Need help?
General
