To Next Page

To Previous Page

T10F A0608-14.0 HBM: public 3

English

1 Safety instructions 6........................................

2 Markings used 11............................................

2.1 The markings used in this document 11..........................

2.2 Symbols on the product 12.....................................

3 Torque flange versions 13....................................

4 Application 14...............................................

5 Structure and mode of operation 15...........................

6 Mechanical installation 17....................................

6.1 Conditions on site 19..........................................

6.2 Installation orientation 19......................................

6.3 Installation options 20.........................................

6.3.1 Installation without dismantling the antenna ring 21................

6.3.2 Installation with subsequent stator mounting 22...................

6.3.3 Installation example with couplings 23...........................

6.3.4 Installation example with joint shaft 23...........................

6.4 Mounting the rotor 24..........................................

6.5 Mounting the stator 28.........................................

6.6 Installing the clamp fixture 31...................................

6.7 Fitting the slotted disc (speed measuring system) 33..............

6.8 Aligning the stator (speed measuring system) 34..................

7 Electrical connection 37......................................

7.1 General information 37........................................

7.1.1 FCC and IC compliant installation for US and

Canada installation only 38.....................................

7.2 Shielding design 39...........................................

7.3 Option 2, code KF1 41........................................

7.3.1 Adaptation to the cable length 41...............................

HBM T10F User Manual

Questions and Answers: