4 A0608-14.0 HBM: public T10F
7.4 Option 2, code SF1/SU2 43....................................
7.5 Supply voltage 46.............................................
8 Calibration 48...............................................
8.1 Calibration option 2, code KF1 49...............................
8.2 Calibration option 2, code SF1/SU2 49...........................
9 Settings 50..................................................
9.1 Torque output signal, code KF1 51..............................
9.2 Torque output signal, code SF1/SU2 51.........................
9.3 Setting up the zero point 51....................................
9.4 Functional testing 52..........................................
9.4.1 Power transmission 52........................................
9.4.2 Aligning the speed module 53..................................
9.5 Setting the pulse count 55.....................................
9.6 Vibration suppression (hysteresis) 56............................
9.7 Form of speed output signal 56.................................
9.8 Type of speed output signal 58.................................
10 Loading capacity 59.........................................
10.1 Measuring dynamic torque 59..................................
11 Maintenance 61..............................................
11.1 Speed module maintenance 61.................................
12 Dimensions 62..............................................
12.1 Rotor dimensions 62..........................................
12.2 Stator dimensions 64..........................................
12.3 Mounting dimensions 66.......................................
To Next Page
Loading...
Need help?
General
